Call 800 866 0000

Subscribe to RSS Feed

Pool Liners

Pool Liners

http://mypoolspot.com/media/catalog/category/FREE-1310_1.jpg

When replacing your above ground swimming pool liner, it's important to know which style of pool liner you have. To help clear up any uncertainty, below is a brief description of each type of swimming pool liner and how it attaches to the swimming pool. If you require additional assistance please call our tech support team.

Overlap Pool Liners are easy to identify as they simply go up the inside of the pool wall and hang over on the outside, leaving several inches of excess vinyl visible. These liners are held in place with strips of plastic called liner coping strips. Overlap liners are the most affordable pool liner and can come plain or decorative and in various thicknesses. Overlap liners are made to fit 48" 52" or 54" pool walls. Note: Always replace cracked or old coping strips to ensure a tight secure fit.

Unibead Pool Liners work in most any above ground pool and are very easy to install. Unibeads attach by simply hooking onto the top of the pool wall. If using a bead track, tear off the removable hook and snap liner into the track or receiver. This stylish upgraded liner needs no additional parts for it's use. Great waterline graphics, 20ga or thicker 25ga vinyl, 48", 52" and 54" wall heights available. Note: It's very important to measure your pool including wall height before ordering any unibead liner.

Expandable Pool Liners are simply very tall overlap liners. Extra big to ensure adequate material exists to accommodate deeper swimming areas. Expandable liners allow for up to 3 feet of additional water depth, making typical above ground pools up to 6 or 7 feet deep. Deep ends and deep centers are created by dishing out the pool floor to the desired shape and depth prior to installing the expandable liner. These liners conform to your unique pool floor shape. Trim off excess material if needed.

Beaded Pool Liners work only in an above ground pool using a bead track. Beaded liners simply snap down into the bead track or bead receiver along the top of the pool wall. Because the Unibead liner is capable of doing the same thing, there is no need to stock both style liners any longer. However we do stock the Doughboy, Lomart and Embassy factory replacement beaded liners. Note: It's very important to measure your pool including wall height before ordering any beaded liner.

Items 1 to 100 of 423 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Items 1 to 100 of 423 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5